Here are some simple install instructions for your stick stickers.

• Your Stick Sticker order will arrive in an individual jacket packaging.
• Pull your stickers from the jacket and grab a pair of scissors.
• Cut off one sticker for each stick.
• Make sure your stick is completely dry. So wipe down the area you would like to put your stickers with a dry clean cloth.
• Typical application for your Stick Stickers is right below the tape line at the top of your stick on the thin part of the shaft.
• Peel off the back of the stickers so the transfer tape will have the sticker attached to it.
• We use a clear tape so you can align to the shaft for perfect positioning.
• Apply the transfer tape with the sticker to the location of the shaft.
• Once in perfect position, use your thumb and a little bit of pressure to set the sticker. You can also use a dry cloth to smooth out any bubbles.
• Once your sticker is in place remove the clear transfer tape and your are ready to start using.
  Typically the sticker will take about 1 hour to heal to the stick. After that time it will have a solid bond to the stick.
  Your are now ready to look like a Pro!

Applying Sticker Helmet

Here are some simple install instructions for your helmet numbers and logos.

• Your order will arrive in a clear plastic packaging.
• Pull your stickers from the packaging.
• With a scissors cut off each set of numbers and logos so they are all separate. If the number is a double digit number keep them together.
• Prepare your helmet by drying off before applying. Use a dry towel to clean the area you want the sticker.
• Peel off the back of the stickers so the transfer tape will have the sticker attached to it.
• We use a clear tape so you can align to the shaft for perfect positioning.
• Apply the transfer tape with the sticker to the location of the helmet.
• Once in perfect position, use your thumb and a little bit of pressure to set the sticker. You can also use a dry cloth to smooth out any bubbles.
• Once your sticker is in place remove the clear transfer tape and your are ready to start using.
  Typically the sticker will take about 1 hour to heal to the helmet. After that time it will have a solid bond to the plastic.
  Your are now ready to look like a Pro!

Applying The Car Window Sticker

Here are some simple install instructions for your car window sticker.

• Prepare your car window by drying off before applying. Make sure the window is completely clean before applying.
• Peel off the back of the stickers so the transfer tape will have the sticker attached to it.
• Position the sticker on the window where you would like to place the sticker.
• Once in perfect position, start from the center and smooth out the sticker from the center to the ends. Use your hand or dry cloth on top of the transfer tape to adhere to the window.
• Remove the transfer tape very slowly. Starting on one edge of the sticker and pulling the entire transfer tape off.
  Typically the sticker will take about 1 hour to heal to window. After that time it will have a solid bond to the glass.
  Your are now ready represent your team!